How do I manually add a receiver?


If scanning doesn't work for you, you can also manually add a receiver.  To get started with that, open the app and press Menu > Setup/Scan then press the "Manual Setup" button.  When you do this, the app will display a message showing your phone or tablet's IP address.  Make a note of this because one of the first steps to adding a receiver (or even performing a scan for that matter) is to ensure that your network and equipment is set up correctly.

 

Follow these steps to manually add a receiver:

  1. Confirm your receiver's settings and retrieve its IP address.  Click here for instructions on how to do this.
  2. Once you have ensured that the IP address "matches" as outlined in linked instructions above, enter the receiver's IP address into the app and press the "Add" button.
  3. Once the receiver is found, press the "Done" button to stop manually adding receivers or repeat the steps above to add another one.
If your Android device's IP address and the receiver's IP address both appear similar as outlined in the linked instructions above, click here for more help with resolving this issue.
Last update:
2012-07-12 01:42
Author:
Administrator
Revision:
1.0
Average rating: 1 (1 Vote)

You cannot comment on this entry

Chuck Norris has counted to infinity. Twice.

Most popular FAQs RSS

  1. Confirming settings on the DirecTV receiver or DVR itself ... (768911 views)
  2. The app does not detect my WiFi connection. (220576 views)
  3. How can I find the IP address of my ... (86003 views)
  4. How can I prevent my DirecTV receiver's IP address ... (78339 views)
  5. What are the differences between DirecTV Remote+ FREE and ... (71831 views)
  6. How the $#@* do I set up the Volume ... (66975 views)
  7. The app no longer seems to communicate with a ... (61502 views)
  8. What are the requirements for the DirecTV Remote+ apps? ... (56088 views)
  9. The IP addresses on my Android device and the ... (55254 views)
  10. I have DirecTV Whole Home service but cannot control ... (49076 views)

Latest FAQs RSS

  1. What devices are currently supported in the Volume Plugin? ... (2014-12-06 01:24)
  2. Why isn't Vizio supported in the Volume Plugin? (2014-12-06 01:20)
  3. What are the differences between DirecTV Remote+ FREE and ... (2014-10-15 21:34)
  4. How do I configure Tasker to control the DirecTV ... (2014-10-15 20:39)
  5. How do I use the Shortcut Add-on? (2014-10-15 19:39)

Sticky FAQs