How do I ark>manuallyark> add a receiver?
If scanning doesn't work for you, you can also ark>manuallyark> add a receiver. To get started with that, open the app and press Menu > Setup/Scan then press the "Manual Setup" button. When you do this, the app will display a message showing your phone or tablet's IP address. Make a note of this because one of the first steps to ark>addingark> a receiver (or even performing a scan for that matter) is to ensure that your network and equipment is set up correctly.
Follow these steps to ark>manuallyark> add a receiver:
- Confirm your receiver's settings and retrieve its IP address. <a href="/faq/index.php?action=artikel&cat=3&id=25&artlang=en" target="_blank">Click herea> for instructions on how to do this.
- Once you have ensured that the IP address "matches" as outlined in linked instructions above, enter the receiver's IP address into the app and press the "Add" button.
- Once the receiver is found, press the "Done" button to stop ark>manuallyark> ark>addingark> receivers or repeat the steps above to add another one.
If your Android device's IP address and the receiver's IP address both appear similar as outlined in the linked instructions above, <a href="/faq/index.php?action=artikel&cat=3&id=4&artlang=en" target="_blank">click herea> for more help with resolving this issue.
You cannot comment on this entry